Nissan / Datsun 240Z 260Z 280Z Rebuilt Brake Power Vacuum Booster 72-78 Coupe ONLY. Note: 1972 will require the firewall to be redrilled for this larger booster.
Nissan / Datsun 240Z 260Z 280Z Rebuilt Brake Power Vacuum Booster 72-78 Coupe ONLY. Note: 1972 will require the firewall to be re-drilled for this larger booster.
This is the same rebuild service we provide on all of our show-quality restorations. Photo is just a sample. We have several in stock. Built to order. Please allow one week before it ships.
An overly firm brake pedal is a common symptom of a bad brake master vacuum unit (also known as a brake booster). These units typically fail when the internal diaphragm is torn or rots away over time. A bad check valve or vacuum hoses can also cause the booster not to function, so we recommend inspecting these as well.
No core required. $25 credit if you do exchange a core.
Remanufactured power brake booster in 8.5" diameter. This booster is a stock replacement for late 1973-78 Datsun 240Z, 260Z and 280Z. The early 240Z used a 7" booster so this is not a direct replacement for the those 240Zs, but will fit if drilled as shown.
The 73-78 Z came with an 8.5-inch booster. The larger 8.5-inch 280Z booster made the pedal less stiff. These are NOT the 10-inch 280ZX booster.
The space between the throttle bracket and the clutch slave is the limiting factor.
OEM No: 47210-N3001 47210-N4300
Top quality diaphragm core for perfect performance and reliability.
Units are 100% vacuum tested to ensure these work and function as new.
Exclusive anti-rust finishing paint process extends the unit life.
Master cylinder output rods are preadjusted for easier and faster installation.
